SAE Grease Fitting Set 80 PCS
The Black Diamond™ SAE Grease Fitting Set 80 PCS provides a versatile assortment of SAE fittings for common lubrication points in maintenance and repair work. Each fitting is heat treated to SAE J534 specification, with the greasing end hardened to a minimum of 83 on the Rockwell 15N scale and a case depth of 0.005″ to 0.009″ for wear resistance. A ball check with heat-treated springs helps maintain a consistent seal and increased service life. The steel fittings are zinc plated for corrosion protection, and profiles and dimensions are controlled to conform to SAE standards.
Heat treated to SAE J534 specification with hardness on greasing end to a minimum of 83 on Rockwell 15N scale with a case depth
of 0.005" to 0.009"
Fittings with ball check & heat treated springs for increased life
Steel fittings are plated zinc with a plating thickness of 0.0002" conforming to SAE J534 specifications
Fitting profile & dimensions are accurately controlled & conform to SAE standards
Set components:
1/8"-27 PTF
- Straight - 25
- 45° - 10
- 90° - 10
1/4"-28 SAE-LT
- Straight - 15
- 45° - 10
- 90° - 10
| Dimensions | 5.4 × 6 × 1.4 in |
|---|---|
| Color | Silver |